Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The TMS320C5533AZAYA05 device is a member of TI's C5000 fixed-point digital signal processor (DSP) product family for low-power applications.

Product Attributes (TMS320C5533AZAYA05) 

Category: Embedded DSP (Digital Signal Processor)

Type: fixed-point  

Interface: I2C, I2S, MMC/SD, SPI, UART, USB  

Clock rate: 50MHz  

Non-volatile memory: ROM (128kB)  

On-chip: RAM 128kB  

Voltage - I/O: 1.8V, 2.5V, 2.75V, 3.3V  

Voltage - Core: 1.05V  

Operating Temperature: -40°C ~ 85°C (TC)  

Mounting Type: Surface Mount  

Package/Housing: 144-LFBGA  

Supplier Device Package: 144-NFBGA (12x12) 

Features

Kernel:

High-performance, low-power TMS320C55x fixed-point digital signal processor

20ns, 10ns instruction cycle time

50MHz, 100MHz Clock rate

One or two instructions per cycle

Two product accumulation units (up to 200 million multiply-multiply-accumulate operations per second [MMACS])

Two arithmetic and logic units (ALUs)

Three internal data and operand read buses and two internal data and operand write buses

Software compatible with C55x devices

Industrial temperature devices available

320KB of zero-wait-state on-chip RAM, included:

64KB dual-access RAM (DARAM), eight 4K x 16-bit blocks

256KB Single Access RAM (SARAM), 32 4K x 16-bit blocks

128KB Zero Wait State On-Chip ROM

(4 16K x 16-bit blocks)

Tightly Coupled Fast Fourier Transform (FFT) Hardware Accelerator

Peripherals:

Direct Memory Access (DMA) Controllers

Four DMAs with four channels each (16 channels total)

Three 32-bit general purpose (GP) timers

One optional watchdog or GP

Two embedded multimedia card (eMMC) and secure digital (SD) interfaces

Universal Asynchronous Transceiver (UART)

Serial Port Interface (SPI) with four-chip selection

Master and controlled internal ICs (I2C bus)

Four internal integrated circuit (IC) voices for data transfer (I2S bus)

Device USB port with Integrated 2.0 Hi-Speed Physical Layer (PHY) support:

USB 2.0 Full Speed and Hi-Speed devices

LCD Bridge with Asynchronous Interface

10-bit 4-Input Successive Approximation (SAR) ADC

IEEE-1149.1 (JTAG)

Boundary-scan compatible

32 General Purpose I/O (GPIO) pins

(multiplexed with other device functions)

Up to 20 GPIO pins can be configured simultaneously

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.