Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The EQCO125T40C1TB-I/3DW is a CoaXPress 2.0 transmitter/receiver with integrated equaliser, CDR(reclock) and cable driver. It is designed to send/receive signals on a single cable or PCB pair. In one direction, the 8b/10b coded downlink signal is transmitted between 1.25 Gbps and 12.5 Gbps. In the opposite direction, lower speed 8b/10b coded uplink signals are received at 20.833 Mbps or 41.666 Mbps.

Typical applications of the EQCO125T40 series include links for high-definition cameras, links between FPgas, machine vision, military, aerospace, medical, broadcast and surveillance cameras, and intelligent transportation systems.

Features:

The equalizer, via a Belden 1694A coaxial cable, has a maximum of 40 meters at 12.5Gbps and 130 meters at 1.25Gbps

The same chip is used for both the device (camera) and the host (image capture card), enabling asymmetric full-duplex communication

Low cost version EQCO125T40, used only on the device (camera) side

Supported cable types include 75 coaxial, 50 coaxial and 100 STP (shielded twisted pair)

Sending signals simultaneously over a single cable:

Downlink up to 12.5Gbps

The uplink is 21Mbps or 42Mbps

Coaxial power supply

Can be used as a separate cable repeater, one cable is used for power supply, downlink, and uplink at the same time

Integrated terminal resistor for differential signal transmission

Clock Data Recovery (CDR) restores signal integrity in both directions

Both the uplink and downlink include equalizers, CDRS, and cable drivers

No reference clock operation (no crystal or clock required)

Low power consumption/single supply, 1.25V hour

16-pin 0.65mm pitch 4mm QFN package

Small PCB occupies space and requires very few off-chip components

Industrial grade temperature range

Lead-free, RoHS compliant

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.