Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

TX7516ALH - Five-Level, 16-Channel Transmitter with T/R Switch, and On-Chip Beamformer

Product Description

TX7516ALH is a highly integrated, high-performance transmitter solution for ultrasound imaging system. The device has total 16 pulser circuits, 16 transmit/ receive switches (referred as T/R or TR switches), and supports on-chip beamformer (TxBF). The device also integrates on-chip floating power supplies that reduce the number of required high voltage power supplies.

Product Features

Transmitter supports:

– 16-channel 5-level pulser and active transmit/ receive (T/R) switch

5-level pulser:

– Maximum output voltage: ±100 V

– Minimum output voltage: ±1 V

– Maximum output current: 2 A

– Support 4A output current mode.

– True return to zero to discharge output to ground

– Second harmonic of –45 dBc at 5 MHz

– –3-dB Bandwidth with 1-kΩ || 240-pF load

20 MHz for a ±100V supply

25 MHz for a ±70V supply

35 MHz for a ±100V supply in 4A mode

– Integrated jitter: 100 fs measured from 100 Hz to 20 kHz

– CW mode close-in phase noise: –154 dBc/Hz at 1 kHz offset for 5-MHz signal

– Very low receive power: 1mW/ch

Applications

Ultrasound imaging system

Piezoelectric driver

In-probe ultrasound imaging

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.