Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

FT4232HPQ is a Hi-Speed USB device with a Type-C/PD 3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device.

Feature

Support PD specification Rev 3.0.

Port 1 mode configuration for Sink or Dual-role

Port 2 works as Sink, supporting chargethrough to port1 (FT2233HPQ and FT2233HPLonly )

Support 5V3A, 9V3A, 12V3A, 15V3A and 20V3APDOs as sink or source Type-C/PD PhysicalLayer Protocol

PD policy engine using 32-bit RISC controllerwith 8kB data RAM and 48kB code ROM

PD mode configuration through externalEEPROM

Options to use external MCU controlling PDpolicy through I2C interface

USB to dual serial ports with a variety ofconfigurations.

Entire USB protocol handled on the chip. NoUSB specific firmware programming required.

USB 2.0 High Speed (480Mbits/Second) andFull Speed (12Mbits/Second) compatible.

Two Multi-Protocol Synchronous Serial Engine(MPSSE) on channel A and channel B, tosimplify synchronous serial protocol (USB toJTAG, I2C, SPI or bit-bang) design.

Independent Baud rate generators.

RS232/RS422/RS485 UART Transfer Data Rateup to 12Mbaud. (RS232 Data Rate limited byexternal level shifter).

Royalty-free Virtual Com Port (VCP) andDirect (D2XX) drivers eliminate the requirementfor USB driver development in most cases.

Applications

USB bridge with Type-C/PD (chargers and devices)

High-power application via USB PD and/or Type-C port

Get power from USB device functions, e.g. portable USB host needs charging when USB is connected.

Single chip USB to two channels UART (RS232, RS422 or RS485) or Bit-Bang interfaces.

Single chip USB to 2 JTAG channels

Single chip USB to one JTAG channel and one UART.

Single chip USB to one SPI channel and one UART.

Single chip USB to two SPI channels.

Single chip USB to two Bit- Bang channels.

Single chip USB to one SPI channel and one JTAG channel.

Single chip USB to two I2C channels.

Numerous combinations of two channels.

Upgrading Legacy Peripheral Designs to USB

Field Upgradable USB Products

Cellular and cordless phone USB data transfer cables and interfaces.

Interfacing MCU / PLD / FPGA based designs to USB

PDA to USB data transfer

USB Smart Card Readers

USB Instrumentation

USB Industrial Control

USB FLASH Card Reader / Writers

Set Top Box PC - USB interface

USB Digital Camera Interface

USB Bar Code Readers

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.