Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

FT4233HPQ is a High-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery standards enabling support for power negotiation with the ability to sink or source current to a USB host device.

Feature

Supports the PD specification Rev 3.0.

Port 1 mode configuration for Sink or Dual-role.

Port 2 works as Sink, supporting charge throughto Port 1(FT4233HPQ and FT4233HPL only).

Supports 5V3A, 9V3A, 12V3A, 15V3A and 20V3APDOs as sink or source.

Type-C/PD Physical Layer Protocol.

PD policy engine using 32-bit RISC controllerwith 8kB data RAM and 48kB code ROM.

PD mode configuration through externalEEPROM.

Options to use external MCU controlling PDpolicy through I2C interface.

USB to quad serial ports with a variety ofconfigurations.

Entire USB protocol handled on the chip. No USBspecific firmware programming required.

USB 2.0 High Speed (480Mbits/Second) and FullSpeed (12Mbits/Second) compatible.

Two Multi-Protocol Synchronous Serial Engine(MPSSE) on channel A and channel B, to simplifysynchronous serial protocol (USB to JTAG, I2C,SPI or bit-bang) design.

Independent Baud rate generators.

RS232/RS422/RS485 UART Transfer Data Rateup to 12Mbaud. (RS232 Data Rate limited byexternal level shifter).

FTDI’s royalty-free Virtual Com Port (VCP) andDirect (D2XX) drivers eliminate the requirementfor USB driver development in most cases.

Applications

USB to single mode SPI master controller

USB to dual mode SPI master controller

USB to quad mode SPI master controller

USB to single SPI slave controller

USB to I2C master interface controller

USB to I2C slave interface controller

Utilising USB to add system modularity

Incorporate USB interface to enable PCtransfers for development systemcommunication

USB Industrial Control

USB Data Acquisition

Accessory connectivity solutions for mobilesand tablets

USB dongle implementations for Software/Hardware Encryption and Wireless Modules

Detect USB dedicated charging ports, to allowfor high current battery charging in portabledevices.

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.