sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:FT4222HQ-D
Data Manual:FT4222HQ-D.pdf
Brand:FTDI
Particular Year:23+
Package:32-VFQFN
Delivery Date:New original
Stock: 2000pcs
FT4222HQ-D is a USB2.0 to Quad-SPI/I2C interface Device Controller.
Feature
Single chip USB2.0 Hi-speed to SPI/I2C bridgewith a variety of configurations
Entire USB protocol handled on the chip.
On-chip OTP memory for USB Vendor ID (VID),Product ID (PID), device serial number,product description string and various othervender specific data.
Configurable industry standard SPIMaster/Slave interface controller
Support configurable data width with single,dual, quad data width transfer mode in SPImaster
SCK can support up to 30MHz in SPI master
Up to 53.8Mbps data transfer rate in SPImaster with quad mode transfer
Support single bit data transfer with full-duplextransfer in SPI Slave
Support up to 4 channels slave selectioncontrol pins in SPI master application
Configurable I2C Master/Slave interfacecontroller conforming to I2C v2.1 and v3.0specification.
Applications
USB to single mode SPI master controller
USB to dual mode SPI master controller
USB to quad mode SPI master controller
USB to single SPI slave controller
USB to I2C master interface controller
USB to I2C slave interface controller
Utilising USB to add system modularity
Incorporate USB interface to enable PCtransfers for development systemcommunication
USB Industrial Control
USB Data Acquisition
Accessory connectivity solutions for mobilesand tablets
USB dongle implementations for Software/Hardware Encryption and Wireless Modules
Detect USB dedicated charging ports, to allowfor high current battery charging in portabledevices.
Model
Brand
Package
Quantity
Describe
Microchip
48-LQFP
1000
Ethernet Switch 10/100 Base-T/TX PHY I²C, SPI Interface 48-LQFP (7x7)
Microchip
64-VFQFN
1000
Ethernet Switch IEEE 802.3, 100 Base-T PHY MII, RGMII, RMII, SPI Interface 64-VQFN (8x8)
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
FTDI is a professional manufacturer that designs and supplies USB chips and software solutions. Combining easy-to-implement IC devices with well-proven free USB firmware and software drivers, FTDI provides a shortcut to USB implementation.The companys…
FT260Q
The FT260Q is an interface device controller that bridges the gap between a standard USB HID class driver and an I2C slave and/or UART device. USB HID class is supported by most operating systems without the need to install custom drivers.Product Attr…FT245RNQ
FT245RNQ is a USB to parallel FIFO interface Controllers.Product AttributesProtocol USB Function Bridge, USB to FIFO Interface FIFO Standards USB 2.0 Voltage - Supply 3.3V ~ 5.25V Current - Supply 15mA Operating Temperature -40C ~ 85C (TA) Pack…FT245RNL
FT245RNL is a USB to parallel FIFO interface Controllers.Product AttributesProtocol USB Function Bridge, USB to FIFO Interface FIFO Standards USB 2.0 Voltage - Supply 3.3V ~ 5.25V Current - Supply 15mA Operating Temperature -40C ~ 85C (TA) Pack…FT600Q-B
FT600Q-B is a USB 3.0 to FIFO interface bridge chip.Product FeaturesSupports USB 3.0 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps)/USB 2.0 Full Speed (12Mbps) transfer.Supported USB Transfer Type: Control/Bulk/InterruptUp to 8 configurable endpoint…FT602Q-B
FT602Q-B is a USB-to-FIFO interface to SuperSpeed USB (USB 3.1 Gen 1) USB Video Class (UVC) bridge chip.Product FeaturesSupports USB 3.1 GEN 1 Super Speed (5Gbps) / USB 2.0 High Speed (480Mbps)Supports USB Transfer Types: Control/Bulk/InterruptSupport…FT312D-32Q1C
FT312D-32Q1C is a USB 2.0 Full Speed host IC specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port. The device will bridge the USB port to a UART interface via the Android Open Accessory proto…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: