Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

CY8CMBR3102-SX1I features an advanced analog sensing channel and the Capacitive Sigma Delta PLUS sensing algorithm, which delivers a signal-to-noise ratio of greater than 100:1 to ensure touch accuracy even in extremely noisy environments.

Features

Register-configurable CapSense Express controller

No firmware development required

Patented CSD sensing algorithm

High sensitivity (0.1 pF)

Overlay thickness of up to 15 mm for glass and 5 mm for plastic

Proximity solutions

Sensitivity up to 2 fF per count

Best-in-class >100:1 SNR performance

Superior noise-immunity performance against conducted and radiated noise

Ultra-low radiated emissions

SmartSense Auto-tuning

Sets and maintains optimal sensor performance during run time

Eliminates manual tuning during development and production

Average current consumption of 22 µA per sensor at 120-ms refresh interval

Wide parasitic capacitance (CP) range: 5–45 pF

Advanced user interface features

User-configurable LED brightness for visual touch feedback

Up to eight high-sink current GPOs to drive LEDs

Buzzer signal output for audible touch feedback

Analog voltage output

Attention line interrupt to the host to indicate any change in sensor status

System diagnostics to detect

Improper value of the modulating capacitor (CMOD)

Out of range sensor parasitic capacitance (CP)

Simple GUI for device configuration

System diagnostics for rapid debug

Supports up to 400 kHz

Wake-on-hardware address match

No bus-stalling or clock-stretching during transactions

Low-power 1.71-V to 5.5-V operation

Deep Sleep mode with wake-up on interrupt and I2C address detect

Industrial temperature range: –40 °C to +85 °C

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.