Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The CC2652PSIPMOTR SimpleLink™ CC2652PSIP is a multi-protocol 2.4GHz wireless microcontroller (MCU) with a System-in-Package (SiP) certified module that supports the following protocols: Thread, Zigbee®, low-power Bluetooth® 5.2, IEEE 802.15.4, IPv6-enabled Smart Objects (6LoWPAN) and proprietary systems, including TI 15.4-Stack (2.4GHz) and concurrent multi-protocols via Dynamic Multi-Protocol Manager (DMM) drivers. IPv6-enabled Smart Objects (6LoWPAN) and proprietary systems, including TI 15.4-Stack (2.4GHz) and concurrent multi-protocols via Dynamic Multi-Protocol Manager (DMM) drivers. The device is optimized for low-power wireless communications and advanced detection in building security systems, HVAC, medical, wired networks, portable electronics, home theatre and entertainment, and connected peripheral markets. The device's outstanding features include.

- Small 7mm x 7mm system level package certified module, 2.4GHz, with DC/DC components, balanced-unbalanced transformer and crystal oscillator

- SimpleLink™ CC13xx and CC26xx software development kits (SDKs) support a variety of protocol stacks in a flexible manner

- Coin cell power at +10dBm with 33 mA transmit current consumption

- Extended battery life for wireless applications with a low standby current of 1µA at full RAM hold

- Industrial temperature support with a minimum standby current of 11µA at 105⁰C.

- Advanced sensing via a programmable, autonomous, ultra-low power sensor controller CPU with fast wake-up. For example, the sensor controller is capable of 1Hz ADC sampling at 1µA system current.

- Low SER (soft error rate) FIT (time base fault) for extended operating life without interference to the industrial market and SRAM parity check always on to prevent damage from potential radiation events.

- The software-controlled dedicated radio controller (Arm® Cortex®-M0) provides flexible low-power RF transceiver functionality, supporting multiple physical layers and RF standards.

- Excellent radio sensitivity and robustness (selectivity and blocking) performance for low power Bluetooth ® with -103dBm at 125kbps (LE coded PHY).

The CC2652PSIP device is part of the SimpleLink™ MCU platform, which includes Wi-Fi®, low-power Bluetooth, Thread, Zigbee, Sub-1 GHz MCUs and host MCUs that share a common, easy-to-use development environment with a single-core software development kit (SDK) and a rich set of tools

Specifications

Core: Arm Cortex M4F

Operating frequency: 2360 MHz to 2500 MHz

Data bus width: 16 bit, 32 bit

Program memory size: 352 kB

Data RAM size: 80 kB

Maximum clock frequency: 1 MHz

ADC resolution: 12 bit

Supply voltage - min: 1.8 V

Supply voltage - max: 3.8 V

Max. operating temperature: + 105 C

Package / Case: QFM-48

Mounting Style: SMD/SMT

Data Ram Type: RAM

Interface type: I2C, I2S, SSi, UART

Minimum operating temperature: - 40 C

Humidity sensitivity: Yes

Number of ADC channels: 8 Channel

Number of inputs/outputs: 30 I/O

Number of timers: 4

Operating supply voltage: 1.8 V to 3.8 V

Program memory type: Flash

Applications

- 2400 MHz to 2480 MHz ISM and SRD systems 1

- Building automation

- Building security systems - motion detectors, electronic smart locks, door and window sensors, garage door systems, gateways

- HVAC - thermostats, wireless environmental sensors, HVAC system controllers, gateways

- Fire safety systems - smoke and heat detectors, fire alarm control panels (FACP)

- Lifts and escalators - Lift master panels for lifts and escalators

- Industrial transport - asset tracking

- Factory automation and control

- Medical

- Communication equipment

- Wired networks - wireless LAN or Wi-Fi access points, edge routers, small business routers

- Personal electronics

- Portable electronics - RF smart remotes

- Home theatre and entertainment - smart speakers, smart displays, set-top boxes

- Gaming - electronic and robotic toys

- Wearable devices (non-medical) - smart trackers, smart clothing

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.