Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LM5060QDGSRQ1 High Voltage Side Protection Controller provides intelligent control of high voltage side N-channel MOSFETs during normal on/off transitions and fault conditions. The inrush current is controlled by a nearly constant rise time of the output voltage. The POWER GOOD output is indicated when the output voltage reaches the input voltage and the MOSFET is fully conducting. Input UVLO (with hysteresis) and programmable input OVP are provided. enable inputs provide remote on or off control. The programmable UVLO input can be used as a second enable input for safety redundancy. Individual capacitors can be programmed with an initial startup VGS fault detection delay time, a transition VDS fault detection delay time, and a continuous overcurrent VDS fault detection delay time. When a fault condition is detected that lasts longer than the allowable fault delay time, the MOSFET is latched until either the enable input or the UVLO input is switched low and then switched high.

Device Features

Automotive grade/AEC Q-100 version available

Wide operating input voltage range: 5.5 V to 65 V

Supports functional safety

Documentation available to assist in the design of functionally safe systems

Less than 15µA quiescent current in disable mode

Controlled output rise time for safe connection of capacitive loads

Charge Pump Gate Driver for External N-Channel MOSFETs

Adjustable Undervoltage Lockout (UVLO) with Hysteresis

UVLO can be used as a second enable input for systems requiring safety redundancy

Programmable fault detection delay time

MOSFET locks off after detecting a load fault

Low-level active open-drain POWER GOOD (nPGD) output

Adjustable input overvoltage protection (OVP)

Immediate restart after overvoltage shutdown

10-pin VSSOP

Applications

Automotive body electronics

Industrial power distribution and control

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.