sales@hkmjd.com
Service Telephone:86-755-83294757
Microchip Ethernet VSC8541XMV-02 and VSC8541XMV-05 Single-Port Gigabit Ethernet Copper PHYs
Shenzhen Mingjiada Electronics Co., Ltd (Supply, Acquisition) Microchip Ethernet VSC8541XMV-02 and VSC8541XMV-05 Single-Port Gigabit Ethernet Copper PHY with GMII/RGMII/MII/RMII InterfaceDescriptionThe Microchip Ethernet PHY VSC8541XMV-02 and VSC8541X…
Shenzhen Mingjiada Electronics Co., Ltd (Supply, Acquisition) Microchip Ethernet VSC8541XMV-02 and VSC8541XMV-05 Single-Port Gigabit Ethernet Copper PHY with GMII/RGMII/MII/RMII Interface
Description
The Microchip Ethernet PHY VSC8541XMV-02 and VSC8541XMV-05 devices are designed for space-constrained 10/100/1000BASE-T applications. They feature integrated line-side termination to save board space, reduce EMI, and improve system performance. In addition, integrated RGMII timing compensation eliminates the need for on-board delay lines.
The devices include a recovery clock output for synchronous Ethernet applications. Programmable clock squelch control suppresses undesirable clock propagation and helps prevent timing loops. Loop resiliency allows the PHY port to switch between master and slave timing references in 1000BASE-T mode without link interruption.
The following figure shows a high-level overview of a typical VSC8541-02 and VSC8541-05 application.
Application Schematic
Key Specifications
- Conforms to IEEE 802.3 (10BASE-T, 100BASE-TX, and 1000BASE-T) specifications
- Supports R/G/MII
- Supports 1.5 V, 1.8 V, 2.5 V, and 3.3 V CMOS for RGMII versions 1.3 and 2.0 (HSTL not supported), GMII/MII, and RMII version 1.2
- Supports a variety of clock sources: 25 MHz Xtal, 25 MHz OSC, 50 MHz OSC, 125 MHz OSC.
- Supports programmable output frequencies of 25 MHz, 50 MHz, or 125 MHz, independent of the selected Xtal or OSC frequency.
- Supports multiple independent hardware configuration options
- Supports all 5-bit MDIO/MDC addressing for managed mode designs using pull-up/pull-down resistors
- Low alpha-mode compound achieves 80 SER FIT (VSC8541XMV-04 only)
- Device supports operating temperatures from -40 °C ambient to 125 °C node or 0 °C ambient to 125 °C node
- Option to report whether a link partner requests inline Power over Ethernet (PoE and PoE+)
- Available in an 8 mm x 8 mm 68-pin QFN package
Block Diagram
For further information, please contact Mr Chen by phone:
Tel: +86 13410018555
Email: sales@hkmjd.com
Website: www.hkmjd.com
Time:2024-11-19
Time:2024-11-19
Time:2024-11-19
Time:2024-11-19
Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: