Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Mingjiada Electronics Original Supplies Microchip Ethernet PHY VSC8530XMW-04 Single-Port Industrial Grade Fast Ethernet Copper PHY with RGMII/RMII Interface

1.Overview

The VSC8530XMW-04 device is designed for space-constrained 10/100BASE-TX applications. It features integrated line-side termination to save board space, reduce EMI, and improve system performance. In addition, integrated RGMII timing compensation eliminates the need for on-board delay lines.

1.2 Application Diagram

1.3 Key Features

- Superior physical layer and interface technology

- Integrated 10/100BASE-TX Ethernet copper transceiver with the industry's only non-TDR-based VeriPHY™ cable diagnostic algorithm

- Patented line driver with low EMI voltage mode architecture and integrated line-side termination resistor

- Wake-on-Network with Magic Packets

- Supports HP Auto MDIX and Manual MDI/MDIX

- RGMII/RMII MAC interface

- Supports jumbo frames up to 16 kilobytes with programmable synchronization FIFOs

1.4 Key Specifications

- Conforms to IEEE 802.3 (10BASE-T, 100BASE-TX) specifications

- Supports RGMII, RMII

- Supports 1.5 V, 1.8 V, 2.5 V, and 3.3 V CMOS for RGMII versions 1.3 and 2.0 (HSTL not supported) and RMII version 1.2

- Supports a variety of clock sources: 25 MHz Xtal, 25 MHz OSC, 50 MHz OSC, and 125 MHz OSC.

- Supports programmable output frequencies of 25 MHz, 50 MHz, or 125 MHz, independent of the selected Xtal or OSC frequency.

- Supports multiple independent hardware configuration options

- Supports all 5-bit MDIO/MDC addressing for management mode designs using pull-up/pull-down resistors

- Device supports operating temperatures from -40 °C ambient to 125 °C junction temperature

- Optionally reports if the link partner requests inline Power over Ethernet (PoE and PoE+)

- Available in 6 mm x 6 mm 48-pin QFN package

2. Block Diagram

Contact: Mr. Chen

Phone: +86 13410018555

Email: sales@hkmjd.com

Company homepage: http://www.hkmjd.com/