Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

May 15, Omnivision officially 2Gbps SerDes series products in-vehicle add-serial OTX9211 and deserial OTX9342.

At present, this series of products has been a number of domestic car manufacturers and Tier1 project fixed point, OTX9211 and OTX9342 2Gbps in-car camera video add / deserialiser is mainly used in the ring / peripheral / rear view, driver detection system (DMS) / passenger detection system (OMS), streaming media rear-view mirror and other intelligent driving / cockpit system of high-speed transmission scenarios.

Stringer OTX9211 supports DVP input, maximum bandwidth of 116MHz, maximum resolution of 1920×1536, and RAW8/10/12/14/16/20/24, YUV8/10/12, RGB565/888 formats, covering the parameter specifications of the mainstream cameras in the market of 1.0-3.0 megapixels, and deserialiser The OTX9342 supports up to 4 add-serialiser inputs and up to 2.5Gbps/lane2*2lane or 1*4lane MIPI D-PHY TX outputs.

Officially, Omnivision SerDes products have joined hands with a number of domestic and international smart car/cockpit SoC solution providers to complete the hardware and software adaptation. In terms of SerDes peripheral circuits, Omnivision has joined hands with a number of domestic solution providers including PoC inductors to create a highly stable and cost-effective system solution, which effectively reduces the customer's This effectively reduces the system cost and shortens the product development cycle of customers, and truly achieves one-stop service support.

It is worth noting that OTX9211 and OTX9342 chip design, wafer and packaging and testing to achieve the full localisation of the supply chain, to ensure the stability of the supply chain of car manufacturers and Tier 1 and security requirements, at present OTX9211 and OTX9342 has entered the mass production stage.

OTX9211 and OTX9342 have achieved a number of optimised designs in terms of product performance compared with existing solutions at home and abroad, especially in transmission stability: EMC RE/CE can reach class 5 level, CCC/ICC/BCI/RI and other tests have passed the functional A standard, while ESD performance has been strengthened and optimised.

The OTX9211 and OTX9342 are optimised for transmission signal compensation, supporting up to 26m coaxial and 10m STP connections, and up to 4 in-line cable connectors, which meets the major in-vehicle application scenarios.

The OTX9211 and OTX9342 meet AEC-Q100 Grade 2 and ASIL-B functional safety ratings. Omnivision has completed the enhanced testing and passed all the extended testing requirements for HTOL and other test items proposed by some vehicle manufacturers, bringing customers more stable and safer products.

In addition, Omnivision expects to launch its 6Gbps SerDes series products in the third quarter of 2025, which will meet the needs of 3 to 8 megapixel in-vehicle cameras for smart car/cockpit applications.