Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Product advantage

1, HMC1063LP3E through multi-channel output design, integrated low noise amplification function, significantly reduce system power interference, PSRR performance is better than similar competitors, suitable for noise-sensitive RF front-end circuit ‌.

2. The HMC1063LP3E supports a wide input voltage range from 1.8V to 5.2V. The HMC1063LP3E can adjust the output voltage through an external pin to adapt to various power supply environments and meet the power management requirements of complex systems ‌.

3, HMC1063LP3E adopts 3x3 mm QFN package, integrated thermal shutdown protection function, to ensure system stability under extreme temperature, suitable for industrial and vehicle scenes ‌.

HMC1063LP3E Function diagram

summarize

The HMC1063LP3E is a compact I/Q MMIC mixer in a "lead-free" SMT package that can be used as an image rejection mixer or single sideband inverter. The HMC1063LP3E uses two standard Hittite double-balanced mixer units and a 90-degree mixing device, both manufactured using the GaAs Schottky diode process. Low frequency orthogonal hybrid devices are used to produce 1,000 MHz LSB IF output. The HMC1063LP3E is a small alternative to hybrid image rejection mixers and single-sideband frequency converter components. The HMC1063LP3E does not require wire welding and can be manufactured using surface attachment technology.

Main features of HMC1063LP3E

Low LO power: 10 dBm

Wide IF bandwidth: DC-3 GHz

Image suppression: 21 dBc

LO/RF isolation: 40 dB

High input IP3:17 dBm

16-pin 3x3 mm SMT package: 9 mm²

HMC1063LP3E Technical specifications

Radio frequency: 24 GHz to 28 GHz

Conversion loss - Max: 11.5 dB

Maximum operating temperature: + 85 C

Minimum operating temperature: -40 C

Installation style: SMD/SMT

Package/box: QFN-16

Pd- Power dissipation: 550 mW

Product type: RF Mixer

Unit weight: 20.300 mg

Application scenario

1. Rf front-end power management ‌

HMC1063LP3E provides low noise power supply for RF modules such as high-frequency amplifiers and mixers to optimize phase noise and signal integrity. It is commonly found in 5G base stations and satellite communication equipment ‌.

‌2, broadband PLL and VCO power supply ‌

The HMC1063LP3E's multi-channel output features power both phase-locked loop (PLL) and voltage-controlled oscillator (VCO) to improve the performance of the frequency synthesizer. Suitable for radar and test instruments ‌.

‌3, high precision test equipment ‌

HMC1063LP3E low ripple support high resolution ADC/DAC power supply, reduce measurement error, suitable for spectrum analyzer, signal generator and other precision instruments ‌.

‌4, industrial automation system ‌

HMC1063LP3E wide temperature range (-40°C to 85°C) and anti-interference capability, suitable for industrial sensors, motor control modules power voltage regulator ‌.

For price information of HMC1063LP3E, please visit our official website (www.hkmjd.com).