Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

sales@hkmjd.com

英banner
Shenzhen  Mingjiada Electronics Co., Ltd.

Service Telephone:86-755-83294757

Product Classification

AI Processor Chip

Interface-Serial Digital Interface (SDI) IC

Home /Company Dynamics /

Mingjiada——Supply [Renesas] BiCMOS Transceivers: ISL83082EIUZ RS-485/RS-422 Transceivers

Mingjiada——Supply [Renesas] BiCMOS Transceivers: ISL83082EIUZ RS-485/RS-422 Transceivers

Source:our siteTime:2025-02-25Views:

Mingjiada——Supply [Renesas] BiCMOS Transceivers: ISL83082EIUZ RS-485/RS-422 TransceiversShenzhen Mingjiada Electronics Co., Ltd. is a long term supplier of [Renesas] BiCMOS transceiver: ISL83082EIUZ RS-485/RS-422 transceiver.ISL83082EIUZ is a BiCMOS…

Mingjiada——Supply [Renesas] BiCMOS Transceivers: ISL83082EIUZ RS-485/RS-422 Transceivers


Shenzhen Mingjiada Electronics Co., Ltd. is a long term supplier of [Renesas] BiCMOS transceiver: ISL83082EIUZ RS-485/RS-422 transceiver.


ISL83082EIUZ is a BiCMOS transceiver IC manufactured by Renesas, which is designed for balanced communication with RS-485 and RS-422 standards. Here are the details about ISL83082EIUZ:


Model No.: ISL83082EIUZ

Package: MSOP-8

Type: BiCMOS Transceiver IC - RS-485/RS-422 Transceiver


The ISL83082EIUZ is a BiCMOS, ESD protected, 5V powered, single transceiver that complies with the RS-485 and RS-422 balanced communication standards.The ISL83082EIUZ differs from its counterparts in that this Intersil family is specified with a 10% tolerance supply (4.5V to 5.5V).


The ISL83082EIUZ has very low bus currents (+125µA/-75µA), thus providing a true 1/8 unit load on the RS-485 bus. This allows up to 256 transceivers to be connected on the network without the use of repeaters, without violating the 32 unit maximum load specified by the RS-485 specification.


ISL83082EIUZ In a remote utility meter reading system, individual meter readings are transmitted over the RS-485 network to the concentrator, thus allowing a larger number of nodes and minimising the number of repeaters required. All meter readings are then read from the concentrator via a single access port or wireless link.


ISL83082EIUZ - The receiver (Rx) input has a fully fail-safe design that ensures a logic high Rx output if the Rx input is floated, shorted, or terminated but not driven.


ISL83082EIUZ - Product Attributes:

Type: Transceiver

Protocol: RS422, RS485

Number of Drivers/Receivers: 1/1

Duplex: Half

Receiver hysteresis: 20 mV

Data Rate: 115Kbps

Voltage - Supply: 4.5V ~ 5.5V

Operating Temperature: -40°C ~ 85°C

Mounting Type: Surface Mount

Package/Shell: 8-TSSOP, 8-MSOP (0.118’, 3.00mm Width)

Supplier Device Package: 8-MSOP


ISL83082EIUZ - Functional Features:

BiCMOS Technology: The ISL83082EIUZ is manufactured using an advanced BiCMOS process that combines the advantages of bipolar transistors and CMOS transistors to provide high performance and low power consumption.

ESD Protection: ISL83082EIUZ - Each driver output and receiver input is equipped with ±15kV ESD (Electrostatic Discharge) protection, effectively preventing electrostatic damage without latch-up.

5V power supply: ISL83082EIUZ supports 5V power supply and can work stably in a wide voltage range from 4.5V to 5.5V to adapt to different power supply environments.

Full Fail-Safe: The ISL83082EIUZ receivers have full fail-safe features that can handle abnormal conditions such as open circuit, short circuit, termination and floating to improve system reliability.

Small package: The ISL83082EIUZ is available in a small package, such as MSOP, which saves board space and facilitates integration into small devices.


ISL83082EIUZ - Product Features:

Lead-free products available (RoHS compliant)

RS-485 I/O pin ESD protection ±15kV HBM Level 3 ESD protection (HBM) on all pins >7kV

Tiny MSOP package saves 50% of board space

Fully fail-safe (open, short, terminated and floating) receiver

Hot-swappable circuitry

Tx and Rx outputs remain tri-stated during power-up/power-down

True 1/8 unit load, allowing up to 256 devices on the bus

Specified for single 5V, 10% tolerance power supply

High data rates up to 10Mbps

Low quiescent supply current 530µA Ultra-low shutdown supply current 70nA

-7V to +12V common mode input voltage range

Half- and full-duplex pinouts

Tri-state Rx and Tx outputs

Current limit and thermal shutdown for driver overload protection


ISL83082EIUZ - Application Scenarios:

The ISL83082EIUZ is suitable for a variety of electronic devices that require RS-485 or RS-422 communication interfaces, such as industrial control, automation systems, and data communication devices. Its high performance, low power consumption and small package make it ideal for these application scenarios.


In summary, ISL83082EIUZ, as a high-performance BiCMOS transceiver IC, has a wide range of application prospects in the RS-485/RS-422 communication field.


Shenzhen Mingjiada Electronics Co., Ltd. is a long term supplier of [Renesas] BiCMOS transceiver: ISL83082EIUZ RS-485/RS-422 transceiver.

ISL83082EIUZ 老.jpg

Company Introduction
About Us
News Information
Honorary Qualification
Inventory Query
Classification Query
Supplier Query
Help Center
Online Inquiry
Common Problem
Site Map
Contact us

Contact Number:86-755-83294757

Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585

Business Hours:9:00-18:00

E-mail:sales@hkmjd.com

Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong

CopyRight ©2022 Copyright belongs to Mingjiada   Yue ICP Bei No. 05062024-12

Official QR Code

Brand Index:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

Links:

skype:mjdsaler