Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd (Distribution ST) Automotive Grade MCU SPC564A70L7COBR 32-bit Power Architecture Microcontroller for Automotive Powertrain Applications, Brand New & Original, Quality Assurance!

Product Model:SPC564A70L7COBR

Lot: New 23+

Package: LQFP-176

Description of SPC564A70L7COBR

This SPC564A70L7COBR microcontroller is a 32-bit system-on-chip (SoC) device designed for mid-range engine control and automotive transmission control applications.

It is compatible with the STMicroelectronics SPC56xx family of devices and offers higher performance and functionality than the SPC563M device.

Features

■ 150 MHz e200z4 Power Architecture® core

- Variable length instruction encoding (VLE)

- Superscalar architecture unit with 2 execution units

- Up to 2 integer or floating-point instructions per cycle

- Up to 4 multiply and accumulate operations per cycle Per cycle

■ Memory organization

- 2 MB on-chip Flash with ECC and Read-Write-While-Writing (RWW)

- 128 KB on-chip SRAM with standby (32 KB) and ECC

- 8 KB instruction cache (line-locked), configurable as 2- or 4-way

- 14 + 3 KB eTPU code and data RAM

- 4 × 4 crossbar switches (XBAR)

- 24-input MMU

■ Fail-safe protection

- 16 Memory Protection Units (MPUs)

- CRC unit with 3 submodules

- Junction temperature sensor

■ Interrupts

- Configurable Interrupt Controller (INTC) with non-maskable interrupts (NMI)

- 64-channel eDMA

■ Serial channels

- 3 eSCI modules

- 3 DSPI modules (2 of them support downstream microsecond channels [MSC])

- 3 FlexCAN modules with 64 message buffers each

- 1 FlexRay module (V2.1) up to 10 Mbit/s dual or single channel, 128 message objects, ECC

■ 1 eMIOS (24 unified channels)

■ 1 eTPU2 (second generation eTPU)

- 32 standard channels

- 1 Reaction Module (6 channels with 3 each) 1 Reaction Module (6 channels with 3 outputs each)

■ 2 Enhanced Queue Analog-to-Digital Converters (eQADC) 2 Enhanced Queue Analog-to-Digital Converters (eQADC)

- 40 12-bit input channels

- 688 ns minimum conversion time

■ On-chip CAN/SCI boot loader with boot assist module (BAM) Boot assist module (BAM)

■ Nexus kernel at Level 3+; eTPU at Level 1

■ JTAG (5-pin)

Development Trigger Signal (DTS)

■ Clock generation

- On-chip 4-40 MHz master oscillator

- On-chip FMPLL (frequency modulated phase-locked loop)

■ Up to 112 general-purpose I/O lines

Power reduction modes: slow, stop, and standby Standby

Flexible power supply options

- 5 V single supply with external ballast

- Multiple external supplies: 5 V, 3.3 V and 1.2 V

■ Designed for LQFP176

If you are interested, please contact Mr. Chen by phone:

Tel: +86 13410018555

Email: sales@hkmjd.com

Company Home：www.hkmjd.com