Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LPC1765FBD100 is a Cortex-M3 microcontroller for embedded applications featuring high integration and low power consumption running at 100 MHz. Features include 256 kB Flash, 64 kB data memory, USB device/host/OTG, 8-channel DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, Motor Control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, Ultra-low power real-time clock with separate battery supply and up to 70 general-purpose I/O pins.

LPC1765FBD100 Features

ARM Cortex-M3 processor operating at up to 100 MHz

ARM Cortex-M3 built-in nestable vector interrupt controller (NVIC)

Up to 256 KB of on-chip Flash programming memory

Up to 64 kB on-chip SRAM

In-system programming (ISP) and in-application programming (IAP)

8-channel general purpose DMA controller (GPDMA)

USB 2.0 full-speed Device/Host/OTG controller

4 UARTs with fractional baud rate generator, internal FIFOs and DMA support

Dual-channel CAN 2.0B controller

SPI controller with synchronous, serial, full-duplex communication

2 SSP controllers with FIFO and multi-protocol capability

3 enhanced I2C bus interfaces

I2S (Audio Chip Interconnect) interface

70 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors

12-bit/8-channel analogue/digital converter (ADC) with conversion rates up to 200 kHz

10-bit digital/analogue converter (DAC) with dedicated conversion timer and DMA

4 general-purpose timers/counters

One motor control PWM for three-phase motor control

Quadrature encoder interface to monitor an external quadrature encoder

One standard PWM/timer module with external counter inputs

Low-power RTC with separate power domain and dedicated oscillator

Watchdog timer (WDT)

ARM Cortex-M3 system beat timer including an external clock input option

Repeat interrupt timer provides programmable and repeatable timed interrupts

For further power savings, each peripheral has its own clock divider

Standard JTAG test/debug interface compatible with existing tools

Integrated PMU (Power Management Unit)

4 low-power modes: sleep mode, deep sleep mode, power-down mode and deep power-down mode

Single 3.3 V supply (2.4 V to 3.6 V)

Four external interrupt inputs configurable as edge/level triggered

Non-maskable interrupt (NMI) inputs

Wake-up Interrupt Controller (WIC)

Processor wakes up from power-down mode with any interrupt

Undervoltage detection with separate thresholds for triggering interrupts and forcing resets

Power-on reset (POR)

Crystal oscillator operating from 1 MHz to 25 MHz

4 MHz internal RC oscillator calibrated to 1% accuracy

Code Read Protection (CRP) with different security levels

Can be used as a unique serial number for chip identification

LPC1765FBD100 Target Applications

Electronic metrology

Lighting

Industrial networks

Alarm systems

Large appliances

Motor control

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.