Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The IP00C732 is a single-chip solution for high-resolution displays such as 4K2K or 2560x1600. It can also be configured to drive a single 1080P or WUXGA output with 4 input images tiled together on a single output. The IP00C732 has 4 input channels at 166 Mpixels/sec. each, in either RGB, YUV4:2:2 or YUV4:4:4 formats. It features 4 independent scaler blocks, with full 10-bit internal processing. 

The IP00C732 has a powerful output overlay block that is fully programmable to suit different types of applications. The overlay block can be programmed to superimpose all 4 inputs in any combination with alpha blending or color key blending. When used on a single high-resolution display, the IP00C732 has a state-of-the-art image overlap feature to produce a seamless image without any artifacts. 

The IP00C732 is an ideal solution to replace an FPGA which would require a significant amount of external memory and glue logic. The advantages of the IP00C732 are reduced board space, ease of programming, and cost.

IP00C732 Applications

Typical applications for the IP00C732 are:

• Video-Wall: Take any number of input images, up to 4, and  scale them to fit within a single output, with  programmable blending and positioning.

• 4K2K/2560x1600 Display: Convert any input image  seamlessly to a high-resolution output, without the need for external glue logic.

IP00C732 Features

INPUT

• 30-bit RGB/30-bit YUV 4:4:4/20-bit YUV 4:2:2 @ 166 MHz

• Up to 16384 pixels/line with 2176 pixels of active video OUTPUT

• 30-bit RGB/30-bit YUV 4:4:4/20-bit YUV 4:2:2 @ 166 MHz

• Up to 16384 pixels/line with 2176 pixels of active video SCALING

• 6 symbol lter with FIR Filter

• Independent H and V scaling ratios (aspect ratio correction)

• Coecient lter ROM embedded (64 set)

• Frame rate conversion with frame tear protection

BITMAP OSD

• 256 colors 

• Font data development function (65536 characters)

• Support for blinking and semi-transparent (4 color) OSD

• Independent 4 channel output for OSD

• Bitmap transferable from serial ash

CPU INTERFACE

• 8-bit parallel, 4-line serial, I2C

IMAGE QUALITY CONTROL

• 4 channel overlay

• 3x3 color conversion matrix, bias onboard

• Color Key-blending

• Alpha-blending

EXTERNAL MEMORY

• Memory-bus 64-bit 

• DDR2-SDRAM PC667 (512Mbit x 16) x 4

POWER SUPPLY

• 3.3V, 1.8V and 1.2V

PACKAGE

• 544-pin Plastic BGA; (1mm pitch), 27mm x 27mm

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.