Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

PIC32MK0128MCA028-E/N2X is 32-bit Motor Control Application Microcontroller IC with FPU, ECC Flash, and 128KB Flash, 32 KB SRAM, and Op amps.

Features

Up to four PWM pairs

Leading-edge and Trailing-edge blanking

Dead Time for rising and alling edges

Dead Time Compensation

8.33 ns PWM Resolution

Clock Chopping for High-Frequency Operation

Up to two 2s audio data communication interfaces

Up to two SPI control interfaces

Programmable host dlock:

Generation of fractional clock frequencies

Can be tuned in run-time

Unique Features

Permanent non-volatile 4-word unique device serial number

Flash Error Code Correction (ECC)

Direct Memory Access (DMA)

Up to eight channels with automatic data size detection

Programmable Cydlic Redundancy Check (CRC)

Up to 64 KB transfers

Communication Interfaces

Up to two UART modules (up to 25 Mbps)

Supports LIN 2.1 and IrDA@ protocols

Two SPII2S modules (SPI 50 Mbps)

Two 12C modules (up to 1 Mbaud) with SMBus support

Peripheral Pin Select (PPS) to enable remappable pin functions

Timers/Output Compare/Input Capture/RTCC

Up to five 16-bit or one 16-bit and four 32-bit timers/counters

4 Output Compare (OC) modules

4 Input Capture (IC) modules

PPS to enable function remap

Real-Time Clock and Calendar (RTCC) module

Input/Output

5V-tolerant pins with up to 22 mA source/sink

Selectable intemal open drain, pull-ups, and pull-downs

External interrupts on all I/0 pins

Five programmable edge/level-triggered interrupt pins

Qualification and Class B Support

Back-up internal oscillator

Clock monitor with back-up internal oscillator

Global register locking

Debugger Development Support

In-circuit and in-application programming

2-wire or 4-wire MIPS8 Enhanced JTAG interface

Unlimited software and 12 complex breakpoints

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.