Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Minjiada supply interface IC MCZ33905DD5EK MCZ33905 system base chip, new and original, quality assurance, price advantage, real single kexiangt interested friends are welcome to contact us.

Model: MCZ33905DD5EK

Manufacturer: NXP

Year: 21+

Package: HSSOP54

The MC33905 System Basis Chip is a second generation SBC that combines several features to enhance the module design.MC33905 devices are used as advanced power management units for MCUs with additional integrated circuits such as sensors and CAN transceivers.These devices have a built-in enhanced high-speed CAN interface (ISO11898-2 and -5) with local and bus fault diagnosis, protection and fail-safe operation modes. These SBCs may include zero, one or two LIN 2.1 interfaces with LIN output pin switches. They include up to four wake-up input pins and can also be configured as output drivers for flexibility.

Features

Voltage regulator for microcontrollers, 5.0V or 3.3V, part number selectable, external PNP can be used to extend current capability and share power losses

Voltage, current and temperature protection

Very low quiescent current in LP mode

Fully protected embedded 5.0V regulator for CAN drivers

Multiple undervoltage detection to address various MCU specifications and system operating modes (e.g. cranking)

Auxiliary 5.0V or 3.3V SPI configurable regulator for additional ICs with over-current detection and under-voltage protection

MUX output pins for internal device analogue signal monitoring and power monitoring

Advanced diagnostics and monitoring of SPI, MCU, ECU power and critical pins

Multiple wake-up sources in LP mode. CAN or LIN bus, I/O conversion, automatic timer, SPI messages and VDD overcurrent detection

ISO11898-5 compatible high-speed CAN interface with baud rates from 40kb/s to 1.0Mb/s

Expandable product range of devices from 0 to 2 LIN, compatible with J2602-2 and LIN 2.1

Applications

Industrial process control

Automation

Motor control

Robotics