sales@hkmjd.com
Service Telephone:86-755-83294757
To help simplify GaNPA bias, Qorvo introduces the ACT41000-104 low noise DC-DC buck converter
Overview:The Qorvo ACT41000 low noise DC-DC buck converter features a programmable output and auxiliary bias power regulator. These synchronous step-down regulators support a wide input voltage range from 4.5V to 40V and incorporate 50MΩ RDSON high -…
Overview:
The Qorvo ACT41000 low noise DC-DC buck converter features a programmable output and auxiliary bias power regulator. These synchronous step-down regulators support a wide input voltage range from 4.5V to 40V and incorporate 50MΩ RDSON high - and low-side MOSFETs for efficient power conversion. The ACT41000 supports programmable output of voltage and current (limiting) set points, working seamlessly at constant current (CC) and constant voltage (CV) to power the drain of a GaN/GaAs power amplifier (PA). The Qorvo factory programs the default Settings, and the optional MCU can program the default Settings in real time via I2C. The precise 256-step current limit enables the MCU to detect accurate IDQ by eliminating the current sensor IC.
Qorvo proprietary current mode control uses its on-chip oscillator clock to synchronize with a spread spectrum or external clock. This fixed frequency operation has a stable control loop that reduces output power noise and reduces EMI for noise sensitive RF components. The ACT41000 series provides two auxiliary power rails for controllers, sensors and other peripherals.
The ACT41000-104 converter is available in a 32-pin 5mm × 5mm heat-enhanced QFN package.
ACT41000-104 Features:
Input voltage range: 4.5V to 40V
Programmable output, factory defaults
Output voltage range: 3V to 24V (12.5mV step)
Output current (limit) up to 4A (15.6mA step)
450kHz to 2.25MHz fixed frequency current mode with external clock synchronization and spread spectrum
5V/350mA self-biased buck converter with 20mA AUX LDO, programmable output voltage
I2C interface, Fast module +(Fm+, 1MHz)
Protective characteristic
UVLO, OVP, UVP (interrupted/blocked), OCP, TSD
Heat dissipation enhanced (5mm x 5mm) QFN package
Application of ACT41000-104:
RF PA (GaN/GaAs) drain bias/power with IDQ search function
General purpose servers, telecommunications and industrial power supplies
Telecommunication RF module
Radar system
Block diagram
For more information about ACT41000-104 in stock and price: www.hkmjd.com
Time:2024-11-19
Time:2024-11-19
Time:2024-11-19
Time:2024-11-19
Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: