Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The TPS26750SRSMR is a USB Type-C® and USB power delivery (PD) 3.1 controller that supports an extended power range of 240W and features the following core parameters:

Application: USB, Type-C controller

Current - Power supply: 3mA

Voltage - Power supply: 0V - 22V, 4V - 22V, 4.9V - 5.5V, 3V - 3.6V

Operating temperature: -40°C to 125°C (TJ)

Installation type: Surface mount type

Package/Housing: 32-VQFN (4x4)

Description

The TPS26750SRSMR is a highly integrated stand-alone USB Type-C and power delivery (PD) controller, optimized for applications that support USB-C PD power. The TPS26750SRSMR integrates fully managed power paths and powerful protection functions, providing a complete USB-C PD solution. The TPS26750SRSMR also integrates control functions for external battery charger ics, which can enhance ease of use and shorten the time to market for the product. The intuitive GUI based on the network will use clear block diagrams and simple multiple-choice questions to understand the application requirements of users through some simple questions. Finally, the GUI will create configuration images for the user's application, thereby significantly reducing the complexity associated with competing USB PD solutions.

Key features

This device has passed the USB-IF certification for PD3.1

The new USB PD design certification requires PD3.1 silicon

TPS26750 TID number: 11450

Optimized for USB Type-C PD power supply applications

Integrated I2C control for TI battery chargers

For example: Under development

Web-based GUI and pre-configured firmware

For various selection guides and getting started information, see www.ti.com/usb-c and the E2E guide

Extended Power Range (EPR

Support EPR pull-up current

EPR 28 V, 36 V, 48 V and AVS

Programmable Power Supply (PPS

Support PPS as the power supply end and the power receiving end

The independent PPS power supply terminal controls the TI battery charger

A programmable interface for the PPS power receiving end

Liquid detection

Measure directly on the Type-C connector

Integrate error handling and protection

Integrated fully managed power path and protection

Integrated 5V, 3A and 36mΩ power switches

Integrated undervoltage and overvoltage protection as well as current limiting, for surge current protection in 5V and 3A source power paths

The CC pin, which can withstand a voltage of 26V, provides strong protection when connecting incompatible devices

USB Type-C Power Transfer (PD) controller

Ten configurable GPIOs

BC1.2 charging support

3.3V LDO output, supporting battery power depletion

Powered by 3.3V or VBUS power supply

An I2C primary side port

An I2C secondary port

Application scenarios

The TPS26750SRSMR Type-C PD controller is widely used in the following scenarios:

Power tools, power banks, retail automation and payment

Wireless speakers, headphones

Other personal electronic products and industrial applications

Spot direct supply platform: www.hkmjd.com