Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ADS8588SIPMR is an 8-channel, 16-bit synchronous sampling analog-to-digital converter (ADC) with a maximum sampling frequency of 200kSPS for high-speed data acquisition applications ‌.

The ADS8588SIPMR has the following characteristics:

A 16-bit ADC with an integrated analog front end

Synchronous sampling: 8 channels

Bipolar inputs that can be set through pin programming: ±10V and ±5V

High input impedance: 1MΩ

5V analog power supply: 2.3V to 5V I/O power supply

7kV electrostatic discharge (ESD) overvoltage input clamp

Low-drift on-chip reference (2.5V) and buffer

Outstanding performance

Maximum throughput of 200kSPS (for all channels)

Differential nonlinearity (DNL) : ±0.35 least significant bit (LSB) Integral nonlinearity (INL) : ±0.45 LSB

Signal-to-noise ratio (SNR) : 96.4dB Total harmonic distortion (THD) : -114dB

Overheating performance:

Maximum offset drift: 3ppm/°C

Gain drift: 6ppm/°C

On-chip digital filter for oversampling

Flexible parallel, byte and serial interfaces

These features make the ADS8588SIPMR an ideal choice for industrial, scientific research and high-end electronic devices.

Product Details

The ADS8588SIPMR device is an 8-channel, 16-bit, successive approximation (SAR) synchronous sampling analog-to-digital converter (ADC) based on an integrated data acquisition (DAQ) system, with a maximum sampling frequency of 200kSPS per channel. Each channel of this device has a complete analog front end, which includes a programmable gain amplifier (PGA) with an input impedance of up to 1MΩ, input clamping, a low-pass filter and an ADC input driver. In addition, the ADS8588SIPMR also features a low-drift, high-precision reference voltage with a buffer for driving the ADC. With a flexible digital interface, the ADS8588SIPMR supports serial, parallel and parallel byte communication, and is suitable for various host controllers.

The ADS8588SIPMR uses a single 5V power supply and can be configured to accept ±10V or ±5V true bipolar input. The high input impedance characteristic allows for direct connection between the sensor and the transformer, thus eliminating the need for an external driver circuit. This device can achieve high performance, high precision and zero-delay conversion. Therefore, the ADS8588SIPMR is also highly suitable for industrial automation and control ics.

Technical Specification

Youdaoplaceholder0 Supply voltage ‌ : 2.3V to 5V‌

Youdaoplaceholder0 Operating temperature range ‌ : -40°C to 125°C‌

Youdaoplaceholder0 package ‌ : 64-LQFP

Youdaoplaceholder0 Signal-to-noise Ratio (SNR) ‌ : 96.4dB‌

Signal-to-noise ratio (SINAD) : 92.7dB‌

Youdaoplaceholder0 Total harmonic distortion (THD) ‌ : -114dB‌

Application field

The ADS8588SIPMR is suitable for a variety of scenarios that require high-precision and high-speed data acquisition, including:

Power grid monitoring

• Protect the repeater

Multiphase motor control

• Industrial automation and control

Multi-channel data acquisition system

If you need to obtain the exclusive quotation information of [ADS8588SIPMR analog to digital converter], you can visit the Mingjiada electronic official website (www.hkmjd.com) online consultation.