Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd. sells ST automotive chips VN7016AJEPTR High voltage side driver with MultiSense analogue feedback for automotive applications.

VN7016AJEPTR Product Overview

The device is a dual-channel high voltage side driver manufactured using ST's proprietary VIPower® M0-7 technology in the PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads over 3 V and 5 V CMOS compatible interfaces and provides protection and diagnostic functions.

The device incorporates advanced protection features such as load current limiting, active management of overloads through power limiting, and overtemperature shutdown (configurable latching).

The FaultRST pin can unlock the output or disable the latching function in the event of a fault.

Dedicated multi-function multiplexed analogue output pins provide sophisticated diagnostics, including high-precision proportional load current sensing, supply voltage feedback and chip temperature sensing, as well as overload and short-to-ground, short-to-VCC and off-state open load detection.

The sense enable pin allows off-state diagnostics to be disabled in module low-power mode and external sense resistors to be shared between similar devices.

Features

AEC-Q100 certified

General Purpose

Single-channel intelligent high-side driver with MultiSense analogue feedback

Very low standby current

Compatible with 3 V and 5 V CMOS outputs

MultiSense diagnostic function

Multiplexed analogue feedback: load current, VCC supply voltage and TCHIP device temperature with high-precision proportional current mirror

Overload and short to ground (power limit) indication

Thermal shutdown indication

Disconnected open load detection

Output short to VCC detection

Sense Enable/Disable

Protection

Undervoltage Shutdown

Overvoltage Clamp

Load Current Limit

Fast thermal transient self-limiting

Configurable latching on overheat or power limit with dedicated fault reset pin

Ground and VCC loss

Battery reverse using external components

Electrostatic discharge protection

Applications

All types of automotive resistive, inductive and capacitive loads

Specifically for automotive headlamps

If you are interested, please contact Mr Chen:

Tel: +86 13410018555

Email: sales@hkmjd.com

Company website: www.hkmjd.com