Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd. sells [NXP Microcontroller] MKE04Z128VLH4 ARM Microcontroller - MCU Kinetis MT128 64LQFP Quality Assurance, Brand New and Original, Welcome to Consult!

Product Description:

MKE04Z128VLH4 belongs to the Kinetis® KE04 MCU family is a new generation of solutions with enhanced ESD/EMC performance for device applications requiring high cost and high reliability in high electrical noise environments.

- Cost-Effective 32-bit Solution with Low Power Consumption and Reliability

- Pin-compatible within the Kinetis E-Series portfolio and pin-compatible with our 8-bit S08P product family

- Includes a range of powerful analogue, communication, timing and control peripherals in a variety of flash sizes and pin counts

Product Features:

Operating Characteristics

Voltage range: 2.7 to 5.5 V

Flash write voltage range: 2.7 to 5.5 V

Temperature range (ambient): -40 to 105°C

Performance

Up to 48 MHz Arm® Cortex®-M0+ core

Single-cycle 32-bit x 32-bit multiplier

Single-cycle I/O access ports

Memory-to-memory interface

Up to 128 KB Flash

Up to 256 B EEPROM

Up to 4 KB RAM

Clock

Oscillator (OSC) - Loop-controlled Pierce oscillator; crystal or ceramic resonator, frequency range 31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz

Internal Clock Source (ICS) - Internal FLL with internal or external reference clock with internal reference clock accuracy corrected to no more than 1% over the temperature range of 0 °C to 70 °C and no more than 1.5% over the temperature range of -40 °C to 105 °C, up to 20 MHz

Internal 1 kHz low-power oscillator (LPO)

System Peripherals

Power management module (PMC) with three modes: run, wait, stop

Low voltage detection (LVD) with reset or interrupt, selectable trip points

Watchdog (WDOG) with independent clock source

Programmable cyclic redundancy check module (CRC)

Serial circuit debug interface (SWD)

Bit Manipulation Engine (BME)

Safety and Integrity Module

64-bit unique identification (ID) number per chip

Human Interface

Up to 57 general purpose inputs/outputs (GPIOs)

Two keyboard interrupt modules (KBI)

Analogue Modules

One 16-channel 12-bit SAR ADC with internal bandgap reference channel, operating in stop mode, selectable hardware trigger (ADC)

Two analogue comparators with an internal 6-bit DAC and programmable reference input (ACMP)

Timer

One 6-channel FlexTimer/PWM (FTM)

Two dual-channel FlexTimer/PWM (FTM)

One dual-channel Periodic Interrupt Timer (PIT)

One Real Time Clock (RTC)

One Pulse Width Timer (PWT)

One high-speed timer

If you have any request, please contact Mr Chen:

Tel: +86 13410018555

Email: sales@hkmjd.com

Company homepage: www.hkmjd.com