Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd [Supply ST Microcontroller] Sell STM32F334R8T6 High Performance ARM Microcontroller - MCU Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, brand new original, quality assurance, support product testing!

STM32F334R8T6 Product Description:

The STM32F334R8T6 integrates a high-performance Arm® Cortex®-M4 32-bit RISC core operating at up to 72 MHz with an embedded floating-point unit (FPU), high-speed embedded memory (up to 64 Kbytes of Flash and 12 Kbytes of SRAM), and a variety of enhanced I/O and peripheral connectivity to two APB buses. peripherals connected to the two APB buses.

The STM32F334R8T6 microcontrollers offer two fast 12-bit ADCs (5 Msps), up to three ultra-high-speed comparators, an operational amplifier, three DAC channels, a low-power RTC, a high-resolution timer, a general-purpose 32-bit timer, a motor-control-specific timer and four general-purpose 16-bit timers. They also feature standard and advanced communication interfaces: one I2C, one SPI, up to three USARTs and one CAN.

The STM32F334R8T6 operates over the -40 to +85 °C and -40 to +105 °C temperature ranges and has a supply voltage of 2.0 to 3.6 V. A full suite of power-saving modes allows for the design of low-power applications.

The STM32F334R8T6 is available in a 64-pin package.

Depending on the device selected, different sets of peripherals are also included.

STM32F334R8T6 Features

High-resolution timer: HRTIM, six 16-bit counters with 217 ps resolution, 10 PWM outputs, five fault inputs, 10 external event inputs, one synchronisation input, one synchronisation output

ADC: up to two 0.20 μs ADCs (up to 21 channels) with selectable resolutions of 12/10/8/6 bits and conversion ranges from 0 to 3.6 V, supporting single-ended/differential modes

DAC: up to three 12-bit DAC channels with analogue supply voltages from 2.4 V to 3.6 V

Comparators: Three ultra-fast rail-to-rail analogue comparators with analogue supply voltages from 2 to 3.6 V

Operational amplifier: One operational amplifier, available in PGA mode, with analogue supply voltages of 2.4 to 3.6 V for all end-accesses

Capacitive sensing: Up to 18 capacitive sensing channels supporting keystroke, linear, and rotary touch sensors

Communication interfaces

CAN: Supports CAN 2.0 B active interface

I2C: Supports 20 mA current sink, fast mode+, and SMBus/PMBus

USART: Up to 3 USARTs, one with ISO/IEC 7816 interface, supports LIN, IrDA, modem control

SPI: Supports master-slave mode, four-wire SPI and single-wire SPI

These features make the STM32F334R8T6 suitable for a wide range of applications, including but not limited to:

Motor control

Industrial automation

Medical equipment

Instrumentation

Consumer electronics

If you have any request, please contact Mr Chen:

Tel: +86 13410018555

Email：sales@hkmjd.com

Company homepage: www.hkmjd.com