Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Mingjiada company new original distribution MPS MPQ5031GRE MPQ5031 single port USB PD controller

MPQ5031 Charging-Only Single-Port USB PD Controller, AEC-Q100 Qualified

The MPQ5031 is a USB Type-C 2.0 and USB PD 3.0 compliant USB Power Delivery (PD) controller designed for DFP applications such as charging-only USB PD ports and USB hubs.

The device is backward compatible with Quick Charge 3.0 (QC3.0), Battery Charging Specification (BC1.2), Apple Divider mode, Huawei Fast Charge Protocol (FCP), and dedicated charging port (DCP) solutions such as 1.2V/1.2V mode , without user intervention from the outside. It also supports BC1.2 Charge Data Port (CDP) handshake. The I2C interface and GPIO pins provide good communication between the device and an external power converter.

MPQ5031 supports PD power supply up to 100W and supports Programmable Power Supply (PPS). It flexibly configures the Power Delivery Data Object (PDO) list, selects slave devices, configures charging protocols, and sets protection modes.

The device provides two NTC pins for monitoring abnormal temperature rise, such as monitoring the temperature on a USB Type-C socket or on a PCB. The power sharing feature enables intelligent power budget management between the two USB PD ports; when the car battery voltage is low, the PDO capacity is reduced. High voltage I/O pins are used to support short-to-battery protection and short-to-VBUS protection for DC/DC converters.

The MPQ5031 is packaged in a QFN-20 (4mmx4mm) package with tin-plated sides.

Advantage:

Supports USB PD 3.0 and PPS

Wide VBUS Voltage Range from 3.3V to 21V

Up to 100W USB-IF PPS certified

I2C master/slave interface and interrupt function

Load shedding with NTC or low battery detection

External MOSFETs provide desaturation and shoot-through protection

Compact QFN-20 (4mmx4mm) package with tin side

AEC-Q100 qualified