Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd. supplies integrated circuit IC ADE9000ACPZ ADE9000 current and power monitor, regulator, import original, price advantage, welcome to consult!

Model No: ADE9000ACPZ

Batch number: New 23+

Package: LFCSP-40

Description: 7-channel AFE drill 40-LFCSP-WQ (6x6)

ADE9000 Product details:

The ADE9000 is a highly accurate, fully integrated, multi-phase power and power quality monitoring device. The device features excellent analogue performance and a digital signal processing (DSP) core for accurate power monitoring over a wide dynamic range. The integrated high-end reference voltage source ensures low drift across the entire channel, including the programmable gain amplifier (PGA) and the analogue-to-digital converter (ADC), over the entire temperature range, with a total drift of less than ±25 ppm/°C (maximum).

Benefits and features

7 high-performance ADCs

101 dB SNR

Wide input voltage range: ±1 V (707 mV rms FS, gain of 1)

Differential inputs

Maximum channel drift: ±25 ppm/°C (including ADC, internal VREF, PGA drift), 10,000:1 dynamic input range supported by integrated external standard components

Class 0.2 electricity meters

Power quality measurement

IEC 61000-4-30 Class S achievable

VRMS ½, IRMS ½ rms voltage refreshed every half cycle

10 cycles rms / 12 cycles rms

DIP and SWELL monitors

Line frequency - one frequency per phase

Over-zero, over-zero timeout

Phase angle measurement

CT and Roche coil (di/dt) sensors supported

Multi-segment phase/gain compensation for CTs

Digital integrator for Roche coils

Flexible waveform buffer

Ability to resample waveforms to ensure exactly 128 points per line cycle for external harmonic analysis

Events such as DIP and SWELL can trigger waveform storage

Simplified data acquisition to facilitate harmonic analysis in accordance with IEC 6100-4-7

Advanced metering feature set

Total active and fundamental active power, reactive power (VAR), apparent power (VA), watt-hours, spent hours and volt-ampere-hours

Total IRMS and fundamental RMS, VRMS

Total harmonic distortion

Power Factor

Support for active energy standards: IEC 62053-21 and IEC 62053-22; EN50470-3; OIML R46; and ANSI C12.20

Support for reactive energy standards: IEC 62053-23, IEC 62053-24

High-speed communication port: 20 MHz serial port interface (SPI)

Temperature sensor with integrated 12-bit successive approximation register (SAR) ADC

Accuracy: ± 3°C (-40°C to +85°C)

Applications

Electricity and power monitoring

Power quality monitoring

Power protection equipment

Mechanical health conditions

Intelligent distribution units

Three-phase electricity meters

Company home page: www.hkmjd.com