Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The Marvell® 88SN2400B1-BXG2C000 is the industry’s first NVMe over Fabric (NVMe-oF™) SSD converter controller. Designed and optimized to convert any NVMe solid state drive (SSD) into an NVMe-oF-SSD, the 88SN2400 provides an innovative architecture that increases utilization and scalability of SSDs within the data center to ultimately lower total cost of ownership. 

A drive-attached solution, the 88SN2400B1-BXG2C000 enables a revolutionary architecture that supports true scalable high-performance disaggregation of storage from compute by bringing low latency access over the fabric and exposing the entire SSD bandwidth to the network. It does this by using an Ethernet fabric instead of a PCIe fabric controlled and managed by a high-power CPU. 

The 88SN2400B1-BXG2C000 can also be architected in Ethernet Bunch of Flash (EBOF) storage appliances. In a typical high-end 2U24 shelf with Gen3x4 SSDs, the solution can support up to 18M IOPS. Utilizing a Marvell Ethernet switch that supports 2Tb/s and the 88SN2400, data center operators can benefit from a 150GB/s pipe of pooled storage, and better power consumption per IO compared to general purpose architectures. 

The Marvell NVMe-oF SSD converter controller is optimized for a small footprint and can be attached to existing backplanes providing ease of service and eliminating single point of failure. It can also be designed into future Marvell SSD and emerging storage class memory (SCM) controllers.

Target Applications

NVMe-oF NAND SSDs

NVMe-oF SCM SSDs

NVMe-oF SAS/SATA JBODs

SAS JBOF replacement – Ethernet Bunch of Flash (EBOF) using dual-ported NVMe-oF SSDs

Storage disaggregation

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.