Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Following the great success of the first generation Cyclone® device family, Altera® Cyclone II FPGAs extend the range of low-cost FPGA densities to 68,416 logic cells (LEs) and offer up to 622 available I/O pins and up to 1.1 Mbits of embedded memory.Cyclone II FPGAs are manufactured on 300mm wafer and is manufactured on TSMC's 90nm low dielectric process, ensuring fast availability and low cost. By minimising silicon area, Cyclone II devices can support complex digital systems on a single chip at a cost comparable to ASICs. Unlike other FPGA suppliers that sacrifice power and performance for low cost, Altera's latest generation of low-cost FPGAs, Cyclone II FPGAs, deliver 60 percent better performance and half the power compared to competing 90nm FPGAs. the low cost and optimized feature set of Cyclone II FPGAs make them ideal for a variety of automotive, consumer, communications, video processing, test and measurement, and other end-market solutions.

Low-cost embedded processing solutions 

Cyclone II devices support Nios II embedded processors, allowing you to implement custom embedded processing solutions. cyclone II devices can also extend the performance of peripheral sets, memory, I/O or embedded processors. Single or multiple Nios II embedded processors can be designed into Cyclone II devices to provide additional co-processing power or even replace existing embedded processors in your system. Using Cyclone II in conjunction with Nios II enables low-cost, high-performance embedded processing solutions that can extend product lifecycles and reduce time-to-market compared to standard product solutions.

Low-cost DSP solutions 

Use the Cyclone II FPGA alone or as a DSP co-processor to improve the price-to-performance ratio of your digital signal processing (DSP) applications. You can implement high-performance but low-cost DSP systems with the following Cyclone II features and design support: 

■ Up to 150 18 x 18 multipliers 

■ On-chip embedded memory of up to 1.1 Mbit 

■ High-speed interface to external memory CII51001-3.2 1-2

■ DSP intellectual property (IP) cores 

■ DSP Builder interface to Mathworks Simulink and Matlab design environments 

■ DSP Development Kit, Cyclone II Edition

Cyclone II devices include a powerful FPGA feature set optimized for low-cost applications, including a wide range of densities, memories, embedded multipliers, and packaging options. cyclone II devices support a wide range of common external memory interfaces and I/O protocols required by low-cost applications. Parametrizable IP cores from Altera and partners make using Cyclone II interfaces and protocols fast and easy.

Features

The Cyclone II device family features the following: 

High-density architecture with 4,608 to 68,416 LEs 

M4K embedded memory blocks 

Up to 1.1 Mbits of RAM without reducing available logic 

4,096 memory bits per block (4,608 bits per block including 512 parity bits)

Variable port configurations: x1, x2, x4, x8, x9, x16, x18, x32 and x36 

True dual port (one read, one write, two reads or two writes) operation for x1, x2, x4, x8, x9, x16 and x18 modes 

Byte enable for data input masking during write 

Operation up to 260MHz

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.