Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

ATSAMA5D21B-CU is a high-performance, ultra-low-power Arm Cortex-A5 CPU-based embedded microprocessor (MPU) running up to 500 MHz, with support for multiple memories such as DDR2, DDR3L, LPDDR2, LPDDR3, and QSPI and e.MMC Flash.

Feature

Arm Cortex-A5 core running at 500 MHz (785 DMIPS)

Floating Point Unit (FPU) for high-precision computing and accelerated data processing

128 KB of L2 cache for system performance

Market-leading low power consumption

Less than 150 mW in active mode at 500 MHz with all peripherals activated

Less than 0.5 mW in low-power mode with SRAM and registers retention

Dual CAN FD controller

10/100 MAC with IEEE® 1588

Two High-Speed USB ports (configurable as two hosts or one host and one device port)

One High-Speed Inter-Chip Interface (HSIC) port

Peripheral Touch Controller (PTC) with projected capacitive touch sensing 

One 12-bit image sensor controller with raw Bayer support

Graphic LCD controller with overlays for image composition

Advanced security features to prevent counterfeiting, secure external communication and authenticate the system:

PCI pre-certified for payment applications*

On-the-fly encryption/decryption of code from external DDR

Encryption engines supporting AES/3DES, TRNG, SHA

Tamper detection pins

Environmental monitors

Memory content protection (secure key storage)

11 × 11 mm 196 BGA package, 289 BGA (in 0.8 pitch) package and also an ultra-small 256 BGA package (8 × 8 mm in 0.4 pitch)

Extended industrial temperature range: −40°C to 105°C

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.