Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Device model: XCVU065-1FFVC1517C

Type: Embedded - FPGA field programmable gate array

Voltage-power supply: 0.922V ~ 0.979V

Operating temperature: -40℃ ~ 100℃ (TJ)

Package: 1517FCBGA

Virtex™ UltraScale™ devices deliver optimal performance and integration at 20nm, including serial I/O bandwidth and logical capacity. As the industry's only high-end FPGA in the 20nm process node, this family is suitable for applications ranging from 400G networks to large-scale ASIC prototyping/simulation.

Features

Programmable system integration:

- Up to 5.5M system logic unit, 20nm process, and 2nd generation 3D IC

- Integrated 100G Ethernet MAC and 150G Interlaken kernel

Improved system performance:

- High utilization improves speed by two levels

-30G transceiver: A 28G backplane used for chip-to-chip and chip-to-optical fiber

- 16G backplane transceiver with half power consumption

-2400Mb/s DDR4 can work stably under different PVT conditions

BOM cost reduction:

- Cost reduction of 50% - cost per port is ½ of the Nx100G system

-VCXO integrates with fPLL (frequency division phase locked loop) to reduce clock component costs

- The mid-level chip supports 2400 Mb/s DDR4

Total power consumption reduction:

- 40% power consumption reduction compared with the previous generation

- Implements fine-grained clock gating through ASIC-like clocks

- Enhanced system logic unit encapsulation reduces dynamic power consumption

Accelerated design productivity:

- Compatible with Kintex™ UltraScale device pins for high scalability

- Seamless pin migration from 20nm plane to 16nm FinFET

- Collaborate with Vivado™ Design Suite to optimize and accelerate design convergence

Typical application

4x100G repeater

400G MAC - Interlaken Bridge

2x100G multiplexed repeater

400G OTN Switch (POTS)

ASIC Prototype & Simulation

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.