Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The Broadcom® BCM957416N4160C is a dual-port 10 Gb/s PCI Express 3.0 x8 Network Adapter Card designed to the Open Compute Project (OCP) 3.0 Design Specification in small form factor with two 10GBASE-T network connectors. The adapter supports 10GBASE-T and 1000BASE-T Ethernet on Category 6, 6A, or 7 twisted-pair cables. The 1000BASE-T can operate on standard Category 5e UTP. The card uses the Broadcom BCM57416 10GBASE-T controller.

Features

 Dual Port 10 Gb/s 10GBASE-T interface:

– 10GBASE-T IEEE 802.3an.

– 1000BASE-T IEEE 802.3ab.

– EEE on 10GBASE-T and 1000BASE-T.

– Auto sense mode.

– Detection and correction of pair swaps (MDI crossover), pair skew, and pair polarity.

– Auto-negotiation with next page support.

– IEEE fast retrain and link monitoring.

 x8 PCI Express 3.0 compliant.

 SR-IOV with up to 128 virtual functions (VFs).

 Function-Level Reset (FLR) support.

 TruFlow™ flow processing engine.

 Virtual Network Termination—XVXLAN, NVGRE, Geneve, GRE encap/decap.

 vSwitch Acceleration.

 Tunnel-aware stateless offloads.

 DCB support – PFC, ETS, QCN, DCBx.

 RDMA over Converged Ethernet (RoCE)

 Network Controller Sideband Interface (NC-SI).

 SMBus 2.0.

 MCTP over SMBus.

 PCIe-based UART and KCS.

 Jumbo frames up to 9 KB.

 Advanced congestion avoidance.

 Multiqueue, NetQueue, and VMQ.

 IPv4 and IPv6 offloads.

 TCP, UDP, and IP checksum offloads.

 Large send offload (LSO).

 Large receive offload (LRO).

 TCP segmentation offload (TSO).

 Receive-side scaling (RSS).

 Transmit-side scaling (TSS).

 VLAN insertion/removal.

 Interrupt coalescing.

 Network boot—PXE, UEFI.

 iSCSI boot.

 Wake-on-LAN (WOL).

 MSI and MSI-X.

 Conforms to the OCP 3.0 Design Specification Version 1.00.

Applications

Dual-port 10GBASE-T Ethernet adapter for OCP systems.

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.