Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Introduction

The ESP32-S3-PICo-1-N8R8 is a system level package (SiP) product based on the ESP32-S3 that supports 2.4GHz Wi-Fi and Bluetooth® LE wireless communication. Integrate one 8 MB Serial Peripheral Interface (SPI) flash and one serial peripheral interface up to 8 MB PSRAM.

The ESP32-S3-PICO-1's compact size, powerful performance and low power consumption make it suitable for any space-limited or battery-powered device, such as wearables, medical devices, sensors and other IoT devices.

Product characteristics

CPU and memory

• Built-in ESP32-S3 chip, Xtensa® dual-core 32-bit LX7 microprocessor (supports single-precision floating-point arithmetic unit), supports clock rates up to 240 MHz

• 384 KB ROM

• 512 KB SRAM

• 16 KB RTC SRAM

Wi-Fi

• 802.11b/g/n

• Data rate up to 150 Mbps in 802.11n mode

• Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU)

• 0.4µs protection interval

• Working channel center frequency range: 2412 ~ 2484 MHz

Bluetooth

• Low power Bluetooth (Bluetooth LE) : Bluetooth 5, Bluetooth mesh

• Speed support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps

• Advertising Extensions

• Multiple Advertisement Sets

• Channel Selection Algorithm #2

• Wi-Fi and Bluetooth coexist, sharing the same antenna

Application scenario

Due to its powerful processing power and multiple communication interfaces, the ESP32-S3-PICO-1-N8R8 is suitable for a variety of application scenarios, including smart home, smart wear, industrial control, Internet of Things devices, and more.

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.