Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LFE5UM-25F-7MG285C is a high-performance, low-cost FPGA product from Lattice. The ECP5 device adopts a 40nm process and has the following main characteristics ‌ :

‌ High performance ‌ : The ECP5 provides an enhanced DSP architecture, high-speed Serializer/Deserializer (SERDES), and high-speed source synchronization interfaces, making it suitable for high-speed and low-cost applications. Its Lookup Table (LUT) capacity is up to 84K logical units, supports up to 365 user I/ OS, and offers up to 156 18x18 multipliers ‌.

Power consumption and size ‌ : ECP5 devices excel in terms of power consumption and size. Its power consumption is significantly reduced, with static and dynamic power consumption of less than 0.25W with single-channel SERDES and less than 0.5W with four-channel SERDES. In addition, the ECP5 is available in a 10x10 mm, 0.5mm pin-pitch package, featuring high functional density and a small package ‌.

‌ Cabling architecture and I/O support ‌ : The ECP5 device uses an advanced cabling architecture, supports dual-channel SERDES and enhanced DSP modules, and reduces the use of multiplier resources. Its programmable I/O supports several standards, including LVCMOS, XGMII, LVTTL, LVDS, Bus-LVDS, 7:1 LVDS, LVPECL, and MIPI D-PHY ‌.

LFE5UM-25F-7MG285C Specifications:

Series: LFE5UM

Number of logical elements: 24,000 LE

Adaptive logic module - ALM: 12000 ALM

Embedded memory: 1008 kbit

Number of input/output terminals: 118 I/ OS

Supply voltage - Minimum: 1.045V

Power supply voltage - Max: 1.155V

Minimum operating temperature: 0°C

Maximum operating temperature: + 85°C

Data rate: 3.2Gb /s

Installation style: SMD/SMT

Package/Box: CSFBGA-285

Package: Tray

Trademark: Lattice

Maximum operating frequency: 350 MHz

Humidity sensitivity: Yes

Number of logical array blocks -- LAB: 3000 LAB

Product type: FPGA - Field Programmable Gate Array

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.